Sound check on computer

No sound on computers is one of the most common issues for Windows users, especially after Windows Updates (for example the Windows 10 October Update). Don’t worry! There are solutions to fix no sound on computers quickly and easily.How to fix no sound on computers?Here are the solutions to fix no sound in Windows 10/8/7. You don’t need to try them all; Just work your way through until your problem is solved.Check the hardware faultyCheck the audio settings on your computerReinstall your audio driverUpdate your audio driverTroubleshoot the sound issueSwitch to ChromeOSNote: Make sure that the volume icon at the bottom right is not mute or silent. If the icon is displayed with a red cross, it means that no volume on your computer and you should click the icon to unmute it.Why is there no sound on my computer?The reasons why there is no sound on your computer normally are the hardware faculty, the wrong audio settings or the missing or outdated audio driver in your computer.Don’t worry. You can try the solutions below to troubleshoot and fix the no sound on computers issue and have your computer back on track.Fix 1: Check the hardware faultyIf your computer suddenly has a no sound issue, there is likely a problem with the hardware issue. You can troubleshoot by the following tips:1. Check the speaker on your computerSimply take a look at the speaker on your computer and see whether anything is covering the speaker, which could cause no sound on your computer. Make sure no dust or cloth can cover the sound on your computer.2. Check the headphone jack You can first check the headphone jack. Look inside the headphone jack to see if there is any obstacle that may stop the headphones from working properly.If there is, clean the jacks with a cotton swab or soft brush. Push it into the jack and swirl it around a little bit to get the dust and lint out.3. Check the microphone or headphoneIf your computer is connecting to a headphone, you can also check your headphones to make sure that the devices are working normally.You can try to disconnect the headphones and see if there is sound. If yes, it seems to be your headphone issue, so you can replace it with a normal headphone.Fix 2: Check the audio settings on your computerIf the hardware works properly after troubleshooting but still

Has no sound on your computer, you can check the audio settings on your computer.Note: All the screenshots below are shown on Windows 10, but the fixes apply to Windows 8 & 7.1. Check the Volume mixer settings1) Right-click the volume icon at the bottom right corner, and click Open Volume mixer.2) Make sure all the entries at not in the minimum level. In my case, I set Speakers, System Sounds and HyperSnap to 20.3) Now test and see if there is any sound from your computer.2. Make sure your audio device is set as default1) Right-click the volume icon at the bottom right corner, and click Playback devices.2) Check your audio device in the Playback tab. Make sure there is a green check next to your audio device.3) If your audio device is not the default device, select your audio device, and click Set Default. Then click OK to save.4) Test the computer to see whether there is any sound.3. Switch the audio format to fix no sound on the computerIf setting your device as default doesn’t work, you can try to change the audio format.1) Right-click the volume icon at the bottom right corner, and click Playback devices.2) Select your audio device in the Playback tab, and click Properties.3) Click Advanced. In Default Format, choose another different audio rate, then click the Test button. Then play music or audio to test.4) You will need to repeat this until you find a proper audio format. Once you find the proper audio format to work, click OK to save the settings.If the issue persists, go to the next solution.Fix 3: Reinstall your audio driverIf your audio driver is corrupted or incompatible with Windows, you could have a sound problem as well. You can try uninstalling and reinstalling the audio driver to fix it.1) Open Device Manager on your computer.2) Double click Sound, video and game controllers to expand it.3) Right-click your audio card, and click Uninstall device.4) If you see a popup pane to confirm, check the box next to Delete the driver software for this device, then click Uninstall to delete.5) Restart your computer and Windows will automatically download and install the audio driver for you. After that, check the audio to see if it works.Fix 4: Update your audio driverA missing or outdated audio driver can also cause no sound on the computer. If uninstalling the driver doesn’t

Come across pop-up information requesting you if you consider updating your iTunes to the most recent version. Authorize to proceed by Clicking Download iTunes. If you don't get the pop-up message, you can still move by selecting the Help option (top left corner) and like "Check for Updates." After successfully downloading the latest iTunes on your computer, i.e., Windows 10, you can now queue your music or video in your playlist and test whether the no sound error from your iTunes has been resolved.Other Reasons That Make iTunes Not Playing IssuesCheck whether the problem could be arising from AirPlay Speakers. Sometimes, the iTunes no sound issues could arise when your device is connected to AirPlay speakers. If that is the cause of the problem, try to turn off your AirPlay Speakers or disconnect them from your computer. Now check whether the issue was resolved.Check whether it could be Audio Setting on PC/Mac issues. Check out if the Audio setting on your computer is set correctly. Incorrect settings can trigger no sound on your iTunes.

If Razer 7.1 Surround Sound is not working on your Windows 11 computer, the solutions provided in this article will help you resolve the issue. Some users experienced this problem after installing the latest Windows update. However, there could be several other causes of this issue, like corrupted or outdated drivers, incorrectly configured Razer 7.1 Surround Sound device, unsupported audio format, etc.First of all, restart your computer and then check again. If Razer 7.1 Surround Sound is not working in Windows 11, use the following solutions to resolve the issue.Check your default output deviceMake sure that you have selected the right audio device in Razer 7.1 Surround Sound softwareRun Playing Audio TroubleshooterCheck the audio formatDisable all options under the Exclusive ModeTurn off the Spatial SoundSelect the right configuration for your Razer headsetUninstall and reinstall your audio device driverUninstall and reinstall Razer 7.1 Surround Sound softwareLet’s see all these fixes in detail.1] Check your default output deviceIf an audio device other than the Razer 7.1 Surround Sound supported headset is set as the default audio device, you will not hear sound from the Razer 7.1 Surround Sound supported headset. Go through the following instructions to check this:Open the Control Panel.Type sound in the Control Panel search bar.Click Sound.Select the General tab. If the Razer headset is set as a default audio device, you will see a green tick on it. If not, right-click on it and select Set as Default Device.2] Make sure that you have selected the right audio device

’PCI Audio’ (then press Enter). If the PCI Audio Adapter did install, the following is an example of the data that displays on your screen:paud0 Available lv-08 PCI Audio Adapter If the message on your screen indicates that your adapter is Defined instead of Available, shut down your machine. Check the PCI Audio Adapter to ensure it is installed correctly. Run diagnostics on the Audio. Click here to download the latest diagnostics for your system. Check for hardware configuration conflicts under your operating system. For Linux, examine the different files (e.g. /interrupts, /ioports, /modules) in the /proc directory to see if any hardware configuration conflicts exist. This directory contains system information and kernel data. [root]# cat /proc/interrupts (then Enter) - lists the Interrupt Requests (IRQs) and their associated devices. [root]# cat /proc/ioports (then Enter) - lists every device's Input/Output (I/O) address range. Each device should have a unique range. If a conflict exists, you must reconfigure the resources allocated to the devices. [root]# cat /proc/modules (then Enter) - lists the modules that were loaded into the kernel at boot time. Ensure correct modules were loaded. Check that the latest version of DirectX is installed using DXDIAG.EXE (Microsoft systems only). Click Start, then click Run Type DXDIAG.EXE in the Open field Check the DirectX version under System Information Compare the version installed on your system with the latest version available from Microsoft: Verify that the latest system BIOS has been installed. Load the default configuration in the BIOS. If these steps have not solved your problem: Refer to your system's Hardware Maintenance Manual, or refer to "Need more help?" System audio connectors Your computer comes with an audio controller that supports Sound Blaster applications and is compatible with the Microsoft Windows Sound System. The audio controller provides you with the ability to record and play sound and music and to enjoy sound with multimedia applications. You can connect stereo speakers to the Line-Out connector to enjoy better sound quality. The audio connectors in your computer are 3.5 mm (1/8 inch) mini-jacks. A description of the connectors follows: Note: Your computer system might not have all of the connectors shown. Name Symbol What does the port look like? What is the connector used for? Line-Out (speaker) This jack is used to send audio signals from the computer to external devices, such as stereo-powered speakers with built-in amplifiers, multimedia keyboards, or the audio Line-In jack on a stereo system. Note: If your system has internal speakers, the internal speaker in your computer is disabled when an external speaker is connected to the headphone port on your computer. Headphone The headphone jack is used for connecting a stereo headphone or external speakers. You can

Instructions to configure 7.1 Surround Sound on your audio device.On the last screen, click Finish to complete the setup.8] Uninstall and reinstall your audio device driverWith Razer 7.1 Surround Sound software, you can apply the 7.1 Surround Sound on your Razer headset, provided the headset supports 7.1 Surround Sound. The issue can also occur if your Razer headset driver is corrupted. We suggest you uninstall and reinstall your Razer headset driver and see if it helps.Open the Device Manager.Expand the Sound, video, and game controllers node.Right-click on your Razer headset driver and select Uninstall device.After uninstalling the device driver, restart your computer.After restarting your computer, connect your Razer headset to the computer and let Windows install its driver automatically. Now, check if the issue persists.9] Uninstall and reinstall Razer 7.1 Surround Sound softwareIf none of the above solutions worked for you, uninstall and reinstall Razer 7.1 Surround Sound software. To do so, open Windows 11 Settings and go to “Apps > Installed apps.” Now, locate 7.1 Surround Sound and uninstall it. Restart your computer and download the latest version of 7.1 Surround Sound from the official website, and install it again.Read: Computer sound volume too low on Windows 11/10.Does Razer 7.1 surround sound work on Windows 11?Windows 11 supports a 7.1 surround sound channel. To enjoy 7.1 Surround Sound on your audio device, you have to configure it correctly on Windows 11. Also, the same audio device should be set as the default output device on Windows 11.We have already